Labmax Bottle Top Dispensers

The Labmax bottle top dispenser has been developed through extensive testing and input from end users. The result is an easy to use system with a variety of important features. The unique closed circut air purging system allows air and bubbles to be eliminated from the dispenser without loss of valuable reagent. The Reagent "Gaurd Valve" prevents accidental discharge of reagent when the dispenser is not in use. A simple turn of the operations mode selector activates this safety feature. Eliminating the need for discharge tube caps. The exclusive Integrated Swivel Neck allows the discharge tube to be turned 360° for convenient dispensing without affecting the connection to the bottle.

The Dispensers aref ully autoclavable to 121°C for sterilization. The Labmax can be disassembled quickly and easily for thorough cleaning. Quick and accurate volume adjustment is easy with the locking rocker switch. The zero point is manufactured into the Labmax; calibration is not necessary, even after disassembly and cleaning. ISO 9001 Certification has been achieved in the design, developement and manufacturing stages of the Labmax. All Labmax dispensers feature a dated mark for compliance with ISO 9001 procedures

Automatic Bottle Labeler Machine

Pharma Machines are adjustable for cylindrical containers. Labels up to 200mm x 300mm can be applied using Bottle Labeler. The bottles are fed into the machine by hand, and the operator pulls a lever which initiates the labeling cycle.
In Automatic Bottle Labeller Machine, powered rollers rotate the bottle, and the label is dispensed and applied at rotation speed, ensuring an accurate, and wrinkle free smooth application.

The waste backing paper is neatly wound onto a separate take up spool, and can be discarded at the end of the production run. The machine can accommodate a full roll of labels up to 300mm diameter. The waste take up spool can accommodate the waste backing paper from a full roll of labels.

Bottle Label Applicator

The Bottle-Matic will apply labels up to 380mm wide onto cylindrical containers from 19mm to 200mm in diameter and at a rate of up to 1500 pieces per hour.
The Bottle-Matic II can apply one or two labels (Back & Front) to a container and the gap between the labels can be adjusted up to 265mm in increments of 0.25mm.

The Bottle-Matics’ can be adapted to work with tapered, ridged or odd shaped containers, just send us a sample and we will advise you of the cost for any modifications that may be required.For containers under 38mm in diameter and lightweight containers a pressure arm is fitted as standard.

Message in a Bottle invitations

A Message-in-a-Bottle is a fabulous and unique way to invite your guests to your wedding or event! Bottles can safely be mailed as-is, with no special box or tube, for two-ounce first-class.
Bottle invitations are available in any color of paper; for that 'authenic' look, parchment.
paper is recommended Stamped response cards are available as well. Tied with ribbon or rustic cord, they're perfect for announcing a beach or island wedding,
or any event.

For dimensions of the bottle, invitations and response cards,see below. For just the right decorative touch, we can sprinkle sand and seashells into each bottle.

How Do I Choose Bottle Label Size?

Many of our customers choose to buy our self-adhesive water bottle labels. But the question always comes up, “Which label size should I order for my personalized bottled water?” Different areas of the U. S. have different bottle shapes and sizes. Since we have don’t know which bottle you plan on using, we offer two standard sizes of water bottle labels. We ingeniously call them the small water bottle label and the large water bottle label.
How do you know which size will work for your custom water bottle project?

Follow these easy steps:
1. Cut two pieces of paper in our two label sizes:
a. 2"H x 7½"W -- small
b. 2¼"H x 8½"W -- large
2. Wrap each size paper around the bottle of your choice at the store.

3. Choose the size that works best for your bottle and note this in the “Special Instructions” box during the order process.

4. Purchase that bottle size for your event.

5. Follow our handy guide included in every order on how to apply the labels.

Some customers like to have their label ends overlap. Other customers prefer their label ends have a small gap. Either way is fine. If you look at the bottled water at the grocery store, you’ll
notice that labels come in all sizes and are applied in many different ways.