Did u see the beautiful bottle houses?

The oldest extant bottle house was constructed over 50,000 beer bottles in 1907, due to the lack of lumber available in the deserts of Nevada.


"In the old spirit town of Rhyolite, Nevada, a saloon owner built a house out of bottles because lumber was insufficient at the time. Apparently he used some 50,000 beer, whiskey, soda and medicine bottles to build the formation which still stands today. The house took almost six months to complete."


"The bottle house was refurbished and re-roofed by Paramount Pictures in 1925 for a movie locations. Afterwards it was prearranged to the Beatty Improvement Association for maintenance as a historical site."



Subsequently to the bottle house is a "garden" of sculptures made of busted glass with miniature houses, bottle ropes, and whole bunch more glass junk, ... treasures."

Amazing Buddhist Temple build over one million of beer bottles

Fifty years back the Heineken Beer company looked at restructuring its beer bottle to be useful as a building chunk. It never happened, so Buddhist monks from Thailand's Sisaket state took matters into their own hands and collected a million bottles to build the Wat Pa Maha Chedi Kaew temple.

Yet the washrooms and the crematorium are built of bottles, a mix of green Heineken and brown local Chang beer.

arty shot through bottles


details of roof


the pattern work is quite obscure.


Buddhist Monk see the outside roof

Art Recycling with Plastic Bottles

What is Bottle Bill and how it works ?

The term “bottle bill” is really another way of saying “container deposit law.” A container deposit law needs a minimum refundable deposit on beer, soft drink and other beverage containers in order to make certain a high rate of recycling or reuse.

How a bottle bill works

Place on beverage containers are not a new idea. The deposit-refund system was produced by the beverage industry as a means of certification the return of their glass bottles to be washed, refilled and resold.

When a vendor buys beverages from a distributor, a deposit is rewarded to the distributor for each can or bottle purchased. The consumer pays the deposit to the dealer when buying the beverage. When the consumer returns the unfilled beverage container to the retail store, to a liberation center, or to a reverse vending machine, the deposit is refunded. The retailer recover the deposit from the distributor, plus an extra handling fee in most U.S. states. The handling fee, which normally ranges from 1-3 cents, helps cover the cost of handling the containers.

The costs to distributors and bottlers can be equalize by the sale of fragment cans and bottles and by short-term investments made on the deposits that are collected from retailers. In addition to this income, distributors and bottlers realize extra profits on beverage containers that consumers fail to return for the refund.

Denmark: Wine bottle labels made of tin – no trademark contravention

By sentence of 13 May 2009, the Danish Maritime and Commercial Court determined that the wine company, Excellent Wine Danmark A/S’ use, sale and advertising of wine bottles with labels made of tin did not comprise an infraction of the declared trademark rights of Udesen Danmark - a wholesaler within the field of arts and crafts, gift items, wines etc.

Since 2001, Udesen Danmark had manufactured, advertised and sold wines with labels made of tin portraying various events, such as activities (golf, hunting etc.) or special occassions (birthdays, wedding days etc.).

In 2007, Excellent Wine started to offer the wines named “Hunter’s Choice”, “Congratulation” and “Golfer’s Reserve” with labels made of tin (see picture).

Udesen Danmark detained that their “event labels made of tin” were satisfactorily unique in order to function and to be protected as trademarks since trademark rights had been recognized through use of the marks. Udesen further quarreled that Excellent Wine’s labels illustrating the same motives and categories of events were confusingly parallel according to the Danish Trademarks Act to the rights protected by Udesen Danmark.

The Court found that Udesen Danmark’s tin labels did not have intrinsic distinctiveness and further that Excellent Wine’s motives varied with regard to their style and content. Neither the bottles in their whole nor the labels were sufficiently distinctive in order to enjoy protection as trademarks and consequently no trademark violation had taken place.

The interim injunction laid down by the local Bailiff’s court was canceled.

Plastic Bottle Furniture

Topper Tips for creating Water Bottle Labels by yourself

Picking the right label and material are important decisions to making a customized water bottle label. Water Bottle Label is bared to conditions that can vary between different temperatures and climates.

A few things to take into description when choosing your label material is the type of printer being used, the type of bottle it will be applied to, the design being useful to the label and how the bottle will be used.

Once you have finished your bottle material selection, designed the label and printed, the next significant step is to make sure the label is correctly applied to your bottle. The proceeding steps are the easiest and suggested way of applying the label to the bottle.

1. Place the bottle on a shell that will not allow it to roll, such as your lap, with knees sharing the bottle securely in place. Position the top of the bottle at 12 o'clock from the body.

2. Carefully covering the corner of the label under the layer away from the protective backing.

3. Seize the label lightly on both ends and align horizontally with the label area on the bottle. Press the label on the bottle at the center of the label and smooth from the center of the label away to one side, and then from the center of the label away to the other side.

4. Smooth all the boundaries down to eliminate any air pockets or wrinkles.

Keeping these simple tips in mind while creating your bottle labels cannot only make the process simple, but also make some professional results. And specially for those of you that want a professional design without the professional cost.

Key Information on water bottle labels

Water Bottle Labels have become more trendy for many reasons, people wish to make their own custom water bottle labels for many different events.

These can sort from weddings, commercial events, symposium or seminars, schools, party’s or personal events and including water bottles with your own custom water bottle labels on them can actually help you make the event a memorable one for your guests.

Confidently, they’ll continue to memorize the event as they use the water bottles with your custom water bottle labels for their personal use in the weeks to follow after your great event.

There are a variety of different ways that you can acquire some custom water bottle labels made for you. You can either make the custom water bottle labels on your own or you can have a company make them for you. This has the additional benefit of taking out all the aggravate of having to find bottles to use, as often they will provide their own bottles with their own spring water which will have the custom water bottle labels stuck on, and professionally finished.

If you’re going to create a number of custom water bottle labels you could purchase a specialized printer, or once more you can print of specialized custom designed water bottle labels from companies on your inkjet printer.

Mandatory informations to be noticed in wine labels

The front and back on wine labels:

Several wine bottles have two labels. The front label names the wine and takes your eye as you walk down the walkway, and the back label provides you a little more information, sorting from actually helpful suggestions like "this wine tastes delicious with food" to so-useful data such as "this wine has a total acidity of 6.02 and a pH of 3.34."

The U.S. needs certain information to emerge on the front label of all wine bottles basic stuff, such as the alcohol content, the type of wine (generally red table wine or white table wine), and the country of origin but they don't describe front label. So occasionally producers put all that information on the smaller of two labels and call that one the front label. Then the producers place an additional larger, colorful, considerably eye-catching label with little more than the name of the wine on the back of the bottle. Guess which way the back label ends up facing when the bottle is placed on the shelf?

The mandatory verdict:

The central government mandates that certain items of information come into view on labels of wines sold in the U.S. Such items are normally referred to as the mandatory. These includes
• A brand name
• Suggestion of class or type (table wine, dessert wine, or sparkling wine)
• The proportion of alcohol by volume (unless it is contained in the class; for example, the statement "table wine" involves an alcohol content of less than 14 percent)
• Name and address of the bottler
• Net contents (expressed in milliliters; the standard wine bottle is 750 ml, which is 25.6 ounces)
• The phrase Contains Sulfites (with very, very few exceptions)
• The government counsel


Label descriptions:

Here are some additional terms you may find on the label of your favorite bottle of wine.
• Vintage year: The year in which the grapes for a picky wine were harvested.
• Reserve: Designates that a wine has established extra aging at the wine producer before release.
• Estate-bottled: Positions that the company the bottled the wine also grew the grapes.